http://www.slotcarlight.com/en

You can order your SLC, an LED set, and the programming adapter right here. The plain SLC is endowed with a standard coding and can also used with LEDs you already have. Our LED set contains very bright LEDs, which can be dimmed via the SLC Manager, if so desired. The programming adapter is only necessary if the standard coding needs to be changed.

Shipping to Germany is usually done as an „Einschreiben Einwurf“. For shipping costs to other countries please inquire by e-mail.

Current projects (20.09.2017): For 2018 we are planning to release a new version of the SLC. Our aims are a bigger capacitor and a higher loading capacity, which will make it possible to use more LEDs at a higher voltage. If you want to wait for the new version, simply send us an e-mail with the subject-line „SLC 2“. We shall inform you as soon as the new SLC is available.

SLC circuit board

SLC circuit board with 1x connector (4-pin), 2x connectors (9-pin), 6x resistors 150 Ohm (for LEDs with 2 Volt, 20 mA) and 6x resistors 100 Ohm (for LEDs with 3 Volt, 20 mA), copper cooling pad

Preis: 35,00 EUR
inkl. USt. zzgl. Versandkosten (4,00 EUR)

 Stk.
Zum Warenkorb hinzufügen

LED Set 1

LED set suitable for the SLC with the following LEDs:

- 2x xenonwhite, 3 mm, 3.2 Volt, 20 mA, 6000 mcd
- 2x warmwhite, 3 mm, 3.8 Volt, 20 mA, 7150 mcd
- 4x red, 3 mm, 2.1 Volt, 20 mA, 4500 mcd
- 2x blue, 3 mm, 2.8 Volt, 20 mA, 2400 mcd
- 2x yellow, 1,8 mm, 2.2 Volt, 20 mA, 8700 mcd
- 2x Wire Ferrule Terminal 2.5 mm as exhausts ; )

Preis: 5,00 EUR
inkl. USt. zzgl. Versandkosten (4,00 EUR)

 Stk.
Zum Warenkorb hinzufügen

USB-FTDI adapter

Universal adapter with 6-pin connector for programming the SLC. Connection to PC via Mini-USB Cable (not included). The SLC can be programmed with each adapter having this pin-layout: GND, CTS, +5V, TX, RX, DTR

Preis: 10,00 EUR
inkl. USt. zzgl. Versandkosten (4,00 EUR)

 Stk.
Zum Warenkorb hinzufügen

Mein Warenkorb

Es befinden sich keine Artikel in Ihrem Warenkorb.